Sony RM-NX7000 - Manual (Page 78)

78
Customizing the Home display (HOME EDIT)
Continued
■ If you want to change a
component preset code
Press the [YES] key.
For details on programming of a preset
code, see “Programming the preset codes
of components (PRESET)” (page 42).
When the preset setting is complete, go
to step 6.
■ If you do not want to change a preset code
Press the [NO] key. Then go to step 6.
6 Set the label of the new Component key.
For details on setting the label, see “Inputting letters (label setting)”
(pages 40 -41).
Note
You cannot set the same label name as the copied Component key or another
existing Component key, regardless of whether characters are upper or lowercase.
If you try to set the same label name, a message appears.
7 When the label setting is complete, press the [OK] key.
A new Component key is displayed.
8 Confirm the copying of the
Component key, and then
press the [OK] key.
A new Component key created by copying
is assigned on the last page of the Home
display. The display returns to step 4.
If you press the [CANCEL] key, the
display returns to step 6.
9 To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.