Stanton S.550 - Manual (Page 9)

8
OPERATIONS
6. Pausing
˙ Press the PLAY/PAUSE button to switch the play and pause.
˙ The play indicator flashes when the pause mode is set.
˙ Figure 6 show the relationship between the play and pause.
2 4 6
1 5
3 7
Figure 6
n The player has completed the cue or pause operation
and is waiting for the play start command.
o When the PLAY/PAUSE button is pressed and enter
play mode.
p Playing.
q The pause mode is set when the PLAY/PAUSE button
is pressed again
r Pausing.
s Playback resumes when the PLAY/PAUSE button is
pressed again.
t Playing.
7. Cueing
˙ "Cueing" is the action of preparing for playback.
˙ Press CUE button, the player will enter cue mode, the playback returns to cue point and enter pause condition,
the cue indicator light up and play indicator flashes. When PLAY/PAUSE button is pressed, play starts from the
cue point.
˙ When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the
position at which the sound starts and cues there(Auto Cue).
˙ If the CUE button is pressed after the search operation or the scanning operation, the playback returns to cue
point and enter pause condition.
˙ Figure 7-1 shows the relationship between the play and back cue operations.
6 2 4
1 5
3
2
1
8
9
3
9
7
8
Figure 7-1
n The player has completed the cue or pause operation
and is waiting for the play start command.
o When the PLAY/PAUSE button is pressed, playback
starts and the cue point is stored in the memory.
p Playing.
q The pause mode is set when the PLAY/PAUSE button
is pressed again.
r Pausing.
s When the PLAY/PAUSE button is pressed again;
t Playing.
u Press the CUE button.
v The pickup returns to the cue point.(Back Cue)
™ Cue point setting:
When play starts from pause by pressing IN button or Scanning or Frame Search; also skip to a new track by using
skip button, the begin play point will be set to the new cue point.
When a new cue point is set, the cue indicator lights by flash for about 1 second.
NOTE: Daring cue mode, if the CUE button is pressed and hold, playback will start from the cue point, when the
button is released, the player will return to the cue mode automatically, it allows you to check the cue point.
8. Frame search
z Frame search is a function for monitoring the sound at a certain section of the disc and manually changing the
position. Searching is used to set play start points with precision.
z Turn the JOG dial while in pause or cue mode to begin searching. The sound for one revolution of the disc is output
repeatedly. The point at which the sound starts is indicated on the LCD.
z When the JOG dial is turned, the point from which the sound is output moves a number of frames corresponding to
the number of the clicks, and the time display on the LCD also changes.
z The search point moves in the forward direction when the JOG dial is turned clockwise, in the reverse direction
when the JOG dial is turned counterclockwise.
9. Scanning (Fast forward/Fast backward)
z Scanning is a function for moving quickly forward or backward when the SHUTTLE is rotated.
z This unit supports 4 different speeds according to the rotating angle of the SHUTTLE.
z Turn the shuttle dial to begin scanning. The disc moves rapidly forward or backward and the sound is output. The
current scan point is indicated on the LCD.
z Turn the shuttle dial clockwise to scan in the forward direction, counterclockwise to scan in the reverse direction.