Samsung MP-43 - Manual (Page 46)

44
Touch panel sensitivity control
The sensitivity of the touch panel may be adjusted. The default setting will
normally be found to provide satisfactory operation, however, the touch
panel system may respond differently depending upon the moisture of the
skin. The touch panel sensitivity may be reduced or increased relative to
the standard setting.
1. Press and hold the Menu button so that the display shows "Set
Brightness" on the lower line of the text display
2. Press and release the Tuning Up or Down buttons until the display
shows "Touch Pad Set".
3. Press and release the Select button to show the current setting.
4. Press and release the Tuning Up or Down buttons to change the
touch panel sensitivity level.
5. Press and release the Select button to save the new setting.
The default setting after a system reset is Normal.
1
3,5
2,4 2,4