Star Trac FITNESS S-TR - Manual (Page 44)

44 STAR TRAC S SERIES TREADMILLS O WNER ’ S M ANUAL
M
ANAGER
/ M
AINTENANCE
M
ODE
After using your STAR TRAC S SERIES TREADMILL for a period of time, you may wish to change some of its settings.
MANAGER MODE
The Manager Settings allow you to query and modify the basic settings of your treadmill. To enter Manager Settings:
1. Press and hold the , and keys together.
2. A beep will sound and “MANAGER SETTINGS” will scroll once across the P
ROFILE
Window.
3. Release all keys. “SN” will display in the P
ROFILE
Window; the associated numeric value for the parameter will
display in the D
ISTANCE
Window.
NOTE: The system will automatically exit Manager Settings if no key is pressed for 30 seconds.
The following keys are used to modify MANAGER SETTINGS:
Increase and Decrease Incline Keys: Display the next (Increase) and previous (Decrease) parameters.
Keys may also be used to enter the desired value for the currently displayed parameter. Keys will repeat if
held.
Numeric Keypad: Facilitates entry of the desired value for the displayed parameter. These keys do not save
the new value – see OK Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. “UPDATING” will scroll
once across the P ROFILE Window while the update is in process. When the update is complete, the P ROFILE
Window will show the new value for the parameter.
NOTE:
To exit Manager Mode without saving any values or settings, press the S
TOP
key.
NOTE:
Unless otherwise specified, the Item (parameter) name is shown in the P
ROFILE
Window, and the value of the
parameter is shown in the D ISTANCE Window.
The items that you may display and change with the previous keys are:
Item
Lowest
Value Highest
Value Default
Value
Meaning
SN 0 9999 N/A Serial Number. S Series Treadmill serial number (set by factory).
DSW 1.0 99.99 N/A Display Software. Display panel software version number (set by factory).
NOTE:
Software checksum value is displayed in C ALORIES Window; Window;
software Build value is displayed in T
IME
Window
OHR 0 9999 0 Operating Hours. Total operating hours.
DST 0 9999 0 Distance. Total distance traveled in miles or kilometers, based on current UNx
setting.
UNx UNE UNM UNE Units. UNE (English) = units of pounds, miles, feet, inches
UNM (Metric) = units of kilograms, kilometers, centimeters
NOTE: Current value is shown in P
ROFILE Window.
TIM 5 99 99 Time. Maximum time in minutes allowed for a program, excluding cooldown.
WGT 1 (lb)
1 (kg)
500 (lb)
226 (kg)
155 (lb)
70 (kg)
Default Weight (to user). Typical weight in lb (UNx = UNE) or kg (UNx =
UNM).
Lxx N/A N/A LEN Language. Display language; either LEN (English), LGE (German), LSP
(Spanish), LDU (Dutch), LPO (Portuguese), LFR (French), LIT (Italian), LSW
(Swedish) or LKA (Katakana).
NOTE: Current value is shown in P
ROFILE
Window.
LOE OFF ON OFF Lockout Enable. Enables/disables lockout function.
LOI 001 999 001 Lockout ID. Lockout override identification number.