Advanced functions, Hold and resume, Transfer – Snom 220 User Manual
Page 27
27
4. Advanced Functions
Hold and Resume
When a call is in progress, pressing the flash key
or
(language dependent) puts the call on hold, i.e., the speech is set to
mute (neither party can hear the other).
Pressing the flash key again will resume the call. While a call is on hold,
you can establish another call by dialing the desired number.
When more than one call is on hold the following window appears.
Select the party you wish to talk to with the keys
/
. Press the
ENTER/Flash key to get connected.
Key mapping:
CANCEL
The call being held is terminated.
,
Resumes the call being held.
Transfers the call being held.
*,#,digits
Can be used to initiate another call.
,
Handsfree mode on/off.
Transfer
Direct Transfer
During a call press the transfer key
to put the connected party on
hold, then dial the number the call is to be directly transferred to.