Snom 220 - Manual (Page 43)

43
6. Settings
A long list of different settings is available for the snom220 that can be
used to control the behavior of the phone. These settings are explained
in the FAQ “Configuring snom phones for Mass Deployment” you can
find under http://www.snom.com/faq_en.php. The FAQ “How can I
update a snom phone?” describes the different options how to update
the phone, also via setting file.
The settings can be specified in different ways:
Via the phone
Via web browser on a PC
Settings via Phone
Press the MENU key in the idle state of the phone. With the
function keys and you can navigate in the menu. Scroll to the
submenu “Settings” and press ENTER .
You are now in the “Settings” menu, which has the following submenus:
• Redirection
• Base
• SIP
• Codecs
• Miscellaneous
• Network
• Key Mapping
• Administrator Mode
• Reset Values
Use the keys
and to scroll within the “Settings” menu. Press
the ENTER key to select a submenu.
Now the list of settings of the selected submenu is displayed. Use the
and to scroll within the list. By pressing ENTER the value
of the setting can be viewed or modified.
Some entries cannot be set to any variable value. Instead they offer a
list of allowed values from which one has to be selected. Use the
and to scroll within the list to set the desired value. Press ENTER
to set the value. Press CANCEL if you decide not to change the
value.