Sharp TL-M5200 - Manual (Page 46)

44
• The availability of Multi Screen modes depending on the
video signal is as follows.
Input
Mode
Video
Signal
3x1 4x1 3x3 4x4
S-VIDEO
VIDEO NTSC N/A N/A N/A N/A
PAL N/A N/A N/A N/A
Computer1
Computer2 480i N/A N/A
576i N/A
N/A: Not Available
• “Status” and “Position” may not be selected depending
on the input signal.
• Depending on the number of monitors and/or the input
signal, a distributor for the input signal (commercially
available) is required. For details, refer to the “SETUP
MANUAL”.
Note
„ Power On Delay
You can delay the screen display after the monitor is
turned on. The period can be set up to 100 seconds
in units of 1 second. When this function is activated,
the POWER indicator flashes (at approx. 1 second
interval) in orange. This function is disabled when 0
is specified.
„ LED
Specifies whether to light the indicators (POWER,
TIMER, and OPC).
Selectable items Description
On According to the setting,
the indicators light up.
Off The indicators do not
light up.
• Even if “LED” is set to “Off”, the POWER indicator lights
red in standby mode.
• When backlight and/or temperature problems occur, the
TIMER indicator fl ashes red, even if “LED” is set to “Off”.
Note
„ Selecting the background image
(Background)
Selectable items Description
Blue Blue screen
None Black screen
Menu operations