Samsung HT-TZ325 - Manual (Page 54)

54
system setup
DivX (r) registration
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
SETTING THE SPEAKEr MODE
Signal outputs and frequency responses from the speakers will
automatically be adjusted according to your speaker configuration
and whether certain speakers are used or not.
In Stop mode, press the 1. MENU button.
Press the Cursor 2. % button to move to Audio and then press
the ENTEr button.
In the
3. SPEAKEr SETUP, press the ENTEr button again.
Press the Cursor 4.  ,,, button to move to the desired
speaker and then press the ENTEr button.
For C, SL, and SR, each time the button is pressed, the mode •
switches alternately as follows : SMALL ➞ NONE.
For L and R, the mode is set to SMALL.
•
SMALL • : Select this when using the speakers.
NONE • : Select this when no speaker is connected.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 59). `
MOVE ENTER EXIT RETURN
MOVE CHANGE EXIT RETURN