Samsung HT-TZ325 - Manual (Page 56)

56
system setup
USING THE TEST TONE
Use the Test Tone feature to check the speaker connections.
In Stop mode, press the 1. MENU button.
Press the Cursor 2. % button to move to Audio and then press the
ENTEr button.
Press the Cursor
3. % button to move to TEST TONE and then
press the ENTEr button.
The test tone will be sent to • L ➞ C ➞ r ➞ Sr ➞ SL ➞ SW in
order.
If the ENTEr button is pressed again at this time, the test tone
will stop.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE AUDIO
You can adjust the balance and level for each speaker.
In Stop mode, press the 1. MENU button.
Press the Cursor 2. % button to move to Audio and then press the
ENTEr button.
Press the Cursor
3. % button to move to SOUND EDIT and then
press the ENTEr button.
Press the Cursor
4.  , button to select and adjust the desired item.
Press the Cursor , button to adjust the settings.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE ENTER EXIT RETURN
MOVE CHANGE EXIT RETURN
MOVE ENTER EXIT RETURN
STOP EXIT