Socket Mobile 6410-00233 User Manual
Page 10
10
• Other: Select if using an add-on Bluetooth card or adapter not made by
Socket. The COM Port field will appear. Select the COM port that the
host device will use for outbound Bluetooth serial communications.
4. Tap on the Scanner tab. Enter the following settings:
• Trigger Operation:
− Scan always: Select if you would like the CHS to scan whether or not
it has a Bluetooth connection to the host device.
− Scan only when connected to host: Select if you would like the CHS
to detect a Bluetooth connection to the host device before it scans.
Scanning will be a few milliseconds slower. This option allows the
CHS to be triggered remotely if needed.
• Good Read Indicator: Select how you would like the scanner to indicate that
data has been successfully scanned and transmitted to the host device.
5. After modifying any settings, tap ok. If SocketScan is already open, you
must close and reopen SocketScan for the changes to take effect.
Note: The delay in the
‘good scan’ beep
increases with the
distance from the host,
giving the user valuable
feedback about the
strength of the
connection