Socket Mobile 6410-00233 - Manual (Page 9)

CHAPTER 2: SETUP FOR WINDOWS MOBILE 9
STEP 4: Configure Scanner Settings
1. Start the Socket CHS configuration utility.
Tap Start | Settings | System | Socket CHS.
2. In the General screen, for Type of scanner, select Using Socket CHS
Scanner.
3. In the Bluetooth stack field, select the Bluetooth hardware that your host
device will use to connect to the scanner. Depending on which option
you select, additional fields may appear.
• Socket: Select if you are using the Socket SDIO or CF Connection
Kit to connect your host device to the CHS.
• Built-in: Select if your device has Bluetooth built in. The checkbox
Automatically connect to CHS will appear. Check the box for your
device to automatically connect to the CHS whenever you start
SocketScan.
Note: Automatic
connections are only
possible if you have
previously
connected with the
CHS. Otherwise the
checkbox will be
disabled.