Samsung OfficeServ - Manual (Page 51)

45
Parameter Description
Station Speed Dials
Retrieves the speed dial information set in the operator’s
phone.
Reflect the configuration
changes of the switch in
real time except DT/DS
buttons and Station
Speed Dials Sets whether to apply in real time the changes in system
information, such as the DID table, CLIP table or station group
setup.
Number of Set Parameters
Selecting more parameters will extend the initialization time since more
information must be retrieved from the system.
Columns
This tab enables the user to select the information to be displayed on the Incoming Calls,
Active Calls, and Held Calls windows.
Parameters of the [Columns] tab are described below:
Category Parameter Description
CID Telephone number and name of the other party
DID DID number and name
Duration Time elapsed since the call was displayed on the list
Incoming Calls
Active Calls
Held Calls
Detail Additional information such as re-termination or transfer
NOTE
Table of Contents
Home Page