Samsung M6000 User Manual
Page 35
Samsung M6000 User’s Manual
Connecting Peripheral Devices 24
Connecting the Floppy Drive to the Floppy
Connector
Some M6000 computers ship from the factory with both a floppy drive
and a CD-ROM drive included. These systems also ship with a floppy
cable.
Turn off your computer before you install or
remove devices from the SmartBay or connect
or disconnect the floppy cable and drive.
To use the floppy drive and the CD-ROM drive at the same time, install
the CD-ROM drive in the SmartBay. Then attach the floppy drive to
the external floppy connector. Attach one end of the floppy cable to the
floppy drive and the other to the external floppy port on the computer
(Figure 11).
Figure 11. Attaching the Floppy Drive to the Floppy Connector
The floppy cable must be inserted as shown in Figure 11. To insert the
cable correctly, make sure that
The arrows printed on the cable connectors are both facing
upward.
Tabs
Tab
Floppy drive
Cable bead
Tab