Samsung M6000 - Manual (Page 66)

Samsung M6000 User’s Manual Using System Setup 55
inserted in the CD-ROM drive, the computer will attempt to boot from
the floppy drive and then the hard drive.
Exit Menu
Select Exit from the menu bar to display the Exit menu.
Pressing <Esc> does not exit this menu. You
must select one of the options from this menu or
a menu bar item to exit this menu.
Exit Saving Changes: Enables you to exit System Setup and saves
your changes. When you select this item and press <Enter>, a message
appears asking you if you want to save your changes and exit System
Setup. Choose Yes and press <Enter> to save your changes and exit.
Choose No and press <Enter> to remain in System Setup.
Exit Discarding Changes: Enables you to exit System Setup without
saving your changes. When you select this item and press <Enter> a
message appears asking you if you want to save changes before exiting.
Choose No and press <Enter> to exit without saving changes. Choose
Yes and press <Enter> to save changes and exit.
Load Setup Defaults: Loads the default values for all System Setup
parameters. When you select this option and press <Enter>, a message
appears asking if you want to load the default configuration. Choose
Yes and press <Enter> to load default settings and remain in System
Setup. Choose No and press <Enter> to retain your changes and remain
in System Setup.
Discard Changes: Enables you to discard the selections you have
made and restore the values you previously saved. When you select this
option and press <Enter>, a message appears asking if you want to load
the previous configuration. Choose Yes and press <Enter> to load the
previous settings and remain in System Setup. Choose No and press
<Enter> to retain your changes and remain in System Setup.
Save Changes: Saves your selections without exiting System Setup.
When you select this option and press <Enter>, a message appears
asking if you want to save configuration changes. Choose Yes and press