Samsung M6000 - Manual (Page 56)

Samsung M6000 User’s Manual Using System Setup 45
If your computer will not boot after you have changed settings in
System Setup and exited the program, reboot and press <F2> to reenter
System Setup. Once in System Setup, you can try to change the values
that caused your computer boot to fail. If the problem persists, press
<F9> to load the default values.
Main Menu
When you open System Setup, the Main menu appears. You can make
changes to your computer’s basic system configuration from this
menu. The fields displayed in this menu are described below.
System Time: Sets your computer to the time that you specify, usually
the current time. Enter the hour, minute, and second in the format
hh:mm:ss. Use a 24-hour clock. Use the tab key to move between the
hour, minute, and second cells. Use the hyphen key <-> or <Space> bar
to decrease or increase the numbers.
System Date: Sets your computer to the date that you specify, usually
the current date. Enter the month, day, and year in the format
mm:dd:yyyy. Use the tab key to move between the month, day, and year
cells. Use the hyphen key <-> or <Space> bar to decrease or increase
the numbers. This field supports year dates of 2000 and beyond.
Diskette A: Specifies a drive type for floppy drive A. Drive A is the
floppy drive that is inserted in the SmartBay of your computer. Diskette
A options are Not Installed and 1.44/1.25 MB 3½ (default).
Primary Master and Secondary Master: Your computer can support
two IDE drives. The Main menu contains two IDE adapter fields to
configure these drives. Primary Master defines the hard drive installed
in the computer. Secondary Master defines the CD-ROM drive.
To configure a replacement or upgrade hard drive, move the cursor to
select the Primary Master field in the System Setup Main menu, and
then press the <Enter> key. The IDE Adapter submenu appears.
Normally, you can use the Auto field in the submenu to automatically
set the values for the other fields in the submenu. Manually set the other
fields in this submenu only if the drive you have installed in your
computer is not recognized by System Setup.