Prerequisites for internet radio, Connections, Wired connection (ethernet) – Scott WI-FI INTERNET/ETHERNET/FM PLL RADIO r x 400wl User Manual

Page 6: Wi-fi connection, Configurations

Advertising
background image

PREREQUISITES FOR INTERNET RADIO

First of all, you will need a broadband Internet connection and a wireless access
point (Wi-Fi) connected to the broadband Internet via a router and a modem
(cable/DSL). You can choose between a wired

connection (Ethernet) and a

wireless connection (Wi-Fi).

CONNECTIONS

ROUTER

MODEM

INTERNET
DATA PORT

RJ45 ETHERNET
CABLE (NOT
SUPPLIED)

Note: In order to avoid any malfunctions, do not turn on the unit before making

any connections.

Wired connection (Ethernet)

Connect the unit to the broadband Internet using an
RJ45 Ethernet cable (not supplied) via the router
and broadband modem (cable/DSL) as illustrated.
Follow your router’s instruction manual to ensure a
proper Internet connection.
If you do not have a router, you should connect the
unit directly to the modem.


Wi-Fi connection

ROUTER

MODEM

INTERNET
DATA PORT

Use a router (not supplied) to connect the wireless
access point (Wi-Fi) to the broadband Internet as
illustrated. Should you have problems with the
Internet connection setup, contact your networking
device supplier and/ or Internet service provider.
Note: The unit should work anywhere within a range
of at least 15 metres around the wireless access point.
However, the connection will depend on your router
performance and environmental factors such as the
number/ thickness of the walls, doors or windows.

Configurations

twork is protected by Wired Equivalent Privacy (WEP) or Wi-

trusted

you must read

INTERNET RADIO

• If your wireless ne

Fi Protected Access (WPA) data encryption, you need to know the WEP or
WPA code in order to connect the unit to the network.
If your wireless network is configured to accept

stations only, you need to enter the unit MAC address into
your wireless access point. The unit MAC address can be
located by browsing through the menu: Main menu

Æ

Settings

Æ System Æ Connection Æ Status Æ Configuration.

To enter the unit MAC address into your wireless access point,

the instructions supplied with the wireless access point.

For more details on configurations, refer to the
OPERATION” section.

GB- 5

Advertising