Technical manuals, Specifications engine, Chassis – Simplicity ZT4000 Series User Manual

Page 42: Transmissions, Dimensions, Belts and blades, 24 hp briggs & stratton, 26 hp briggs & stratton

Advertising
background image

40

www.simplicitymfg.com

NOTE: Specifications are correct at time of printing and are subject to change without notice.

* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.

Technical Manuals

Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the
product’s components in exploded views (3D illustrations which show the relationship of parts and how they go together)
as well as part numbers and quantities used. Important assembly notes and and torque values are also included.

For applicable manuals currently available for your model, contact our Customer Publications Department at 262-284-8519
(Simplicity). Have the information listed in the box below available when phoning in your request. Technical manuals can
be downloaded from www.simplicitymfg.com

**Engine Power Rating Information

The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive Engineers) code J1940 (Small Engine Power
& Torque Rating Procedure) and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross
engine power may be lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given both the wide array
of products on which engines are placed, and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop
the rated gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine to engine variability.

Specifications

ENGINE:

24 HP Briggs & Stratton

(S/N: 2013156319 & Below)

Make

Briggs & Stratton

Model 44M777-0113-E1
Horsepower

24 @ 3500 rpm

Displacement

44.18 Cu. in (724 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 340

CCA
Oil Capacity

2 qt. (1.89 L) w/ Filter

(S/N: 2013156320 & Above)

Make

Briggs & Stratton

Model 44M777-0133-G1
Horsepower

24 @ 3500 rpm

Displacement

44.18 Cu. in (724 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 340

CCA
Oil Capacity

2 qt. (1.89 L) w/ Filter

26 HP Briggs & Stratton

(S/N: 2013156319 & Below)

Make

Briggs & Stratton

Model 44P777-0124-G1
Horsepower

26 @ 3500 rpm

Displacement

44.18 Cu. in (724 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 340

CCA
Oil Capacity

2 qt. (1.89 L) w/ Filter

(S/N: 2013156320 & Above)

Make

Briggs & Stratton

Model 44P777-0135-G1
Horsepower

26 @ 3500 rpm

Displacement

44.18 Cu. in (724 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 340

CCA
Oil Capacity

2 qt. (1.89 L) w/ Filter

CHASSIS:

Fuel Tank

Capacity: 6 Gallons (22.7 L) Total

Rear Wheels

Tire Size: 20 x 8.00 -10

Inflation Pressure: 15 psi (1,03 bar)

Front Wheels

Tire Size: 11 x 4.00 - 5

Inflation Pressure: 40 psi (2,76 bar)

TRANSMISSIONS:

HydroGear PG-3H / HGM-12E 3131

Type

Pump and Wheel Motor

Hydraulic Fluid

SAE 20W-50 motor oil

Speeds

Forward: 0-8 MPH (0-12.88 km/h)

@ 3400 rpm

Reverse: 0-4 MPH (0-6.44 km/h)

Continuous Torque

222 ft. lbs. (301 Nm)

Output
Maximum Weight

750 lbs. (340 Kg)

on Axle

DIMENSIONS:

Overall Length

79” (201 cm)

Overall Width

61” (155 cm)

Height

65” (165 cm)

Weight (apx..)

945 lbs. (429 kg)

BELTS AND BLADES:

Pump Drive Belt 5100923

44” Deck

Deck Drive Belt 5023496
Mower Blade 5061827

48” Deck

Deck Drive Belt 5023297
Mower Blade 5020843

Advertising