Samsung HLN617W1 - Manual (Page 23)

Setting the Sleep Timer
You can set your TV to automatically turn off after a preset interval.
1 Press the SLEEP button on
the remote control.
2 You’ll see “Off” at the
bottom of the screen. Press
the Sleep button to select
the time interval for the TV
to stay on.
The interval ranges from
30 to 180 minutes.
NOTE
• If no signal is received for 15 minutes, the TV will be
automatically turned off.
45
6 Press the √ button to select “am/pm”,
then press the … or † button to select
the proper time of day (am or pm).
7 Press the √ button to select “CH”, then
press the … or † button to select the
channel you want when the TV turns on.
8 Press the √ button to select “Vol”, then
press the … or † button to select the
volume level you want when the TV turns
on.
9 Press the √ button to select “Activation”,
then press the … or † button to select
“Yes”. When On/Off timers are set, the
“Timer” LED will illuminate (front or side
panel of TV.)
10 When you are finished, press the
MENU button twice.
11 If you want to set the Off Timer, press
the … or † button to select “Off
Timer”. Set the “Off Timer” just as
you set the “On Timer”. Press the EXIT
button to exit the menu.
44
Operation
30 Min.
On Timer
Move Enter Return
Input
Picture
Sound
Channel
Setup
Set On Timer
Hour Min am/pm
6 30 am
▲
▼
CH Vol Activation
03 10 No
On Timer
Move Enter Return
Input
Picture
Sound
Channel
Setup
Set On Timer
Hour Min am/pm
6 30 am
CH Vol Activation
06 10 No
▲
▼
On Timer
Move Enter Return
Input
Picture
Sound
Channel
Setup
Set On Timer
Hour Min am/pm
6 30 am
CH Vol Activation
06 10 No
▲
▼
On Timer
Move Enter Return
Input
Picture
Sound
Channel
Setup
Set On Timer
Hour Min am/pm
6 30 am
CH Vol Activation
6 10 Yes
▲
▼
Time
Move Enter Return
Input
Picture
Sound
Channel
Setup
Clock 10 : 30 am √
Sleep Timer Off √
On Timer 6 : 30 am √
Off Timer Off √
Absent Power Off
When you set the timer “On”, your television will eventually be turned off,
if you do not operate any controls during the 3 hours after the TV is turned on
by timer. This function is available in only the timer “On” mode and will
prevent a leakage accident or overheating, caused by your TV left on for a
long time due to the timer “On” (when you are away on holiday, for example).