Sanitaire SC2800 - Manual (Page 8)

8
Dry Pick Up
To vacuum dry material, use the end of the hose or attach the floor nozzle without the
squeegee.
Wet Pick Up
To vacuum liquids, use the floor nozzle with the squeegee. The filter should be clean for
maximum efficiency.
Attach Hose Coupling
•
Push the hose coupling into the
hose inlet.
•
Give a slight twist to secure.
Connect Electric Plug
•
Place electric plug into outlet.
Hose
Inlet
Power
Switch
Power Switch
The power switch is opposite the hose inlet.
•
Wear ear protection (not provided) if operating the
cleaner for a prolonged period of time.
•
Push power switch to turn on.
How To Use The Blower On The Lid
•
Place hose coupling into blower outlet.
NOTE:
•
Clean the hose, tank and tools before using the blower.
•
Always wear safety goggles. Goggles are not sold with the cleaner.
•
We recommend ear protection if using the cleaner for a long time.
•
Never point blower toward people, animals or objects. The flying debris
can cause injury or damage.
•
Do Not use the cleaner to power a paint sprayer or to supply air to any
other sprayer.
Blower
Blower
Outlet
Hose
Coupling
HOW TO USE
Carry Handle
CAUTION: Do Not carry wet or dry vacuum by the
lid.
•
Carry handles are part of the tank.
•
Always use these handles when lifting the cleaner.
Carry
Handle
Hose Coupling