Sony DVO-1000MD - Manual (Page 37)

Pl
a
y
bac
k
Repeat Playback
37
The REPEAT A-B display appears.
5
Select “A-B SET” by pressing the v button.
6
Press the SET button.
Playback starts, and “A” is displayed as a white
letter at the bottom left of the screen.
7
Press the SET button at the instant when the picture
comes to the point you want to set that as point A.
Point A is set and “A” disappears. Then, “B” is
displayed as a white letter.
If you return to the previous menu display
by pressing the
B button after setting only
point A
The point A set is cancelled. The points A and B
previously set are retained. If you press the
b
button again, you can start setting the point B.
8
Press the SET button at the instant when the picture
comes to the point you want to set as point B.
The point B is set and “B” disappears. The repeat
playback starts between the points A and B set.
Those points A and B are stored until you set new
points A and B or until the disc is unloaded.
Note
When erasing a title (see page 44) or formatting a
disc (see page 33), points A and B set are cleared.
Stopping repeat playback between points
A and B
The following two methods are available to stop repeat
playback between two points.
• Using the
B, b, .PREV/UP, or >NEXT/
DOWN button
• Using a menu operation
To stop repeat playback using the B, b,
.PREV/UP, or >NEXT/DOWN button
Jump to a title or a chapter located outside of the section
specified by the A and B points using the
B, b,
.PREV/UP, or >NEXT/DOWN button.
To stop repeat playback by menu operations
1
Follow the procedure in steps 1 to 2 described in
“Repeat Playback Between Two Points (A-B
Repeat)” on page 36 to display the REPEAT
FUNCTION item.
“A” is highlighted in white.
“A” disappears, and “B” is
highlighted in white.