Sony DVO-1000MD - Manual (Page 51)

Men
u
Basic Menu Operations
51
Example
To return to a higher level
Press the
B button. Whenever you press the B
button, the screen returns to the menu one level up.
4
When the screen with an item you want to set or
change is displayed, select the desired setting by
pressing the
V or v button.
When you move the cursor to the setting, the setting
is highlighted and selected.
Example: “ANALOG” is selected as the
input signal on the following screen.
To continue the settings, go to step 5.
To end the menu operation, go to step 6.
5
Access the desired sub menu by pressing the B, b,
V or v buttons, and repeat step 4.
When you have completed all of settings using the
menu, go to step 6.
6
Press the SET button.
The following screen appears, and the unit starts
saving the settings made.
When saving is completed, the message disappears,
and the unit returns to the normal display.
When the following screen appears during a
menu operation
When you highlight “ESC” and press the SET
button:
The unit returns to the menu display one level higher
than the current one without executing the setting.
When you highlight “EXEC” and press the SET
button:
The confirmation message “READY?” appears.
Press the SET button again.
The message related to the current operation appears,
and the unit completes that operation. When saving is
completed, the message disappears, and the unit returns
to the normal display.
To cancel the menu operation
Push the MENU button in any menu layer before
pushing the SET button.
The message “ABORT!” appears, and all of the changed
settings are cancelled.
The unit returns to the normal screen.
v