Sony 3-213-480-12(1) User Manual

Page 110

Advertising
background image

110

The lower the value, the stricter the limitation.

3

Select the level, and press ENTER.
The Parental setting is complete.

• To cancel the Parental setting for the disc, set

“Rating Level” to “Off” in step 3.

• To change the password, select “Change

Password” in step 2, and press ENTER. When
the display for registering a password appears,
enter a new four-digit password using the
number buttons.

z

Hint

If you enter a wrong number, press

< or CLEAR and

reenter.

Notes

• If you forget your password, select “Factory Setting” in

the “Options” setup.

• Playback of discs without the Parental Control function

cannot be limited on this recorder.

• Depending on the disc, you may be asked to change the

Parental Control level while playing the disc. In this
case, enter your password, then change the level.

Front Display

Adjusts the lighting of the front panel display.

Command Mode

Changes the command mode of this recorder if
other DVD equipment is assigned the same
command mode. Be sure to match the command
mode of the supplied remote to the setting made
here. For details, see “If you have a Sony DVD
player or more than one Sony DVD recorder” on
page 22.

Factory Setting

Allows you to return the setup settings to their
default settings. Note that all of your previous
settings will be lost.

1

Select “Factory Setting,” and press ENTER.

2

Select “Start,” and press ENTER.
The setup settings return to their default
settings.

3

Press ENTER when “Finish” appears.
The power automatically turns off and then on
again, and the recorder is reset to the factory
settings.
When the “Easy Setup” display appears,
follow the instructions for Easy Setup
(page 23) from step 4.

Auto

Adjusts to low lighting when
power is off.

Bright

Maintains bright lighting
when power is off.

Dimmer

Maintains low lighting
regardless of whether the
power is on or off.

Off

Turns off the lighting when
power is off. Maintains the
lighting when power is on.

DVD 1
DVD 2

Select the setting that does
not conflict with other DVD
equipment.

DVD 3

The default command mode
of this recorder.

Advertising
This manual is related to the following products: