Sanyo DTA-2680 - Manual (Page 18)

17
BASIC OPERATION
Electronic volume control
Electronic volume control display
Press VOL-DOWN (
-
) button to adjust
sound level down, the volume level (00 - 30)
will be shown in the LCD display.
Holding down the button will result in
continuous decrease of the sound level.
Similarly, press VOL-UP (+) button to adjust
sound level up.
1.
2.
3.
Muting Function
If the MUTE button is pressed, the audio output will
be muted, and the current display begins to
flashing.
Pressed the MUTE button again to resume.
PRESET EQUALIZATION
Press the EQ button on remote control repeatedly
to cycle through the preset EQ showing on the LCD
display -- PASS, CLASSIC, ROCK, POP and JAZZ.
BASSXPANDER Control
Press the BASSXPANDER button to get the rich
bass sound.
BASSXPANDER shows on display
To switch off the BASSXPANDER function, press
the button once more.
BASSXPANDER shows on display