Sanyo DTA-2680 - Manual (Page 20)

19
Switch on the power and press the CD PLAY/
PAUSE button to select the CD mode.
IN PLAY MODE
PRESS ONCE PRESS TWICE
IN STOP MODE
PRESS ONCE
B A C K T O T H E
BEGINNING OF THE
CURRENT TRACK
P R E V I O U S
TRACK P R E V I O U S
TRACK
NEXT TRACK NEXT TRACK
Press and hold the SKIP button during playback:
: FAST BACKWARD : FAST FORWARD
PLAYING COMPACT DISCS
If there is no CD inside, a "NO DISC" display
will appear.
When there is no disc
1.
2.
Loading a disc
Press the CD DOOR OPEN/CLOSE button to
open the CD door.
To load a disc, simply put the disc onto the
center spindle of the player and then press the
CD DOOR OPEN/CLOSE button again to close
the CD door. After that, reading TOC will start.
Playing the disc ( )
Press PLAY/PAUSE button to play the CD.
Playing track 1
Pause the playing ( )
Press PLAY/PAUSE button while the disc is
playing, the playing time will flash.
While paused
Stopping the disc
Press STOP ( )
Stop condition (TOC display)
Skip and Search Function
Press the SKIP Forward or Backward buttons momentarily during play mode or stop mode.
Ensure that the disc is correctly mounted on the
spindle and locked in place.
1.
2.
The display will show the total number of tracks and
the playing time of the disc.
Press PLAY/PAUSE button again to resume.
To operate by remote control
After reading TOC
Select desired track by pressing 0-9, then press
PLAY/PAUSE button to start playback.
Example: 03=Track 3, 11=Track 11.