Sony BRAVIA 4-256-733-F2(1) - Manual (Page 51)

51 GB
Using
Me
nu F
unct
ions
Screen
(for input other than a
PC) Target Inputs Select “Current” to make custom picture settings to the
current input. Select “Common” to apply common picture
settings to all input.
Screen Format See “To change the Screen Format manually” (page 18).
Auto Format Automatically changes “Screen Format” to match the input
signal. If you want to use the setting that you specified in
“Screen Format”, select “Off”.
4:3 Default Sets the default screen format for 4:3 broadcasts.
Smart Displays conventional 4:3 broadcasts
with an imitation wide screen effect.
4:3 Displays conventional 4:3 broadcasts in
the correct proportion.
Off Uses the setting that you specified in
“Screen Format”.
Auto Display
Area Automatically adjusts the picture to the most appropriate
display area.
Display Area Adjusts the picture display area.
+1 Displays pictures in their original size.
Normal Displays pictures in their recommended
size.
-1 Enlarges the picture so that the edges are
outside the visible display area.
Screen Position Adjusts the vertical position and horizontal position of the
picture.
Vertical Size Adjusts the vertical size of the picture.
(for PC input) Auto Adjustment Automatically adjusts the display position, and phase of the
picture in PC mode.
z
• “Auto Adjustment” may not work well with certain input
signals. In such cases, manually adjust “Phase”, “Pitch”,
“Horizontal Shift”, and “Vertical Shift”.
Reset Resets all PC screen settings to factory settings.
Phase Adjusts the phase when the screen flickers.
Pitch Adjusts the pitch when the picture has unwanted vertical
stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture.
Screen Format Sets “Screen Format” for displaying pictures from your PC.
Normal Displays the picture in its original size.
Full 1 Enlarges the picture to fill the display
area, while maintaining its original
proportion.
Full 2 Enlarges the picture to fill the display
area.
Video Input Settings Colour System Select the colour system according to the input signal from
the input source.
(Continued)