Initial charging and discharging of the batteries – Siemens GIGASET A58H User Manual
Page 11
10
First steps
A58H / IM1 en / A31008-M2055-R101-2-4N19 / starting.fm / 01.08.2008
Ve
rs
ion 4,
29
.10.
2007
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully
charged and discharged.
Please note
u
After the first battery charge and discharge you may replace your hand-
set in its base station or charging cradle after every call.
u
Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u
The batteries may warm up during charging. This is not dangerous.
u
After a while, the charge capacity of the batteries will decrease for tech-
nical reasons.
¤
Place the handset in the base station or
charging cradle for ten hours.
¤
Then remove the handset
from the base station or
charging cradle and do not
replace it until the batter-
ies are completely dis-
charged.
10 h