Sony Cyber-shot DSC-L1 User Manual

Page 101

Advertising
background image

101

DSC-L1 2-186-455-11(1) [OpenType FONT]

Troubleshooting

Symptom

Cause/Solution

The image cannot be played back on

a computer.

• If you are using the “Picture Package” application software, click on help at the upper-right corner

of each screen.

• Consult the computer or software manufacturer.

The image and sound are interrupted

by noise when you view a movie on a

computer.

• You are playing back the movie directly from the “Memory Stick Duo”. Copy the movie to the hard

disk of your computer and then play back the movie from the hard disk (pages 83, 84, 89 and 92).

You cannot print an image.

• Check the printer settings.

Images once copied to a computer

cannot be viewed on the camera.

• Copied to a wrong folder. Copy them to an available folders, such as “101MSDCF” (page 87).
• The folder/file name has been changed on your computer (page 87).

“Memory Stick Duo”

Symptom

Cause/Solution

You cannot insert a

“Memory Stick

Duo”.

• You are inserting the “Memory Stick Duo” backwards. Insert the “Memory Stick Duo” from the

correct side (page 21).

You cannot record on a “Memory Stick
Duo”.

• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the

LOCK position. Set the switch to the recording position (page 117).

• The capacity of the “Memory Stick Duo” is full. Delete unnecessary images (pages 42 and 77).
• The image size is set to [640(Fine)] when recording movies. Insert a “Memory Stick PRO Duo”

(pages 75 and 117) or set the image size to other than [640(Fine)].

You cannot format a “Memory Stick

Duo”.

• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the

LOCK position. Set the switch to the recording position (page 117).

You have formatted a “Memory Stick

Duo” by mistake.

• All the data on the “Memory Stick Duo” are deleted by formatting. You cannot restore them. If you

are using the “Memory Stick Duo” with write-protect switch, we recommend that you set the switch
to the LOCK position to prevent accidental erasure (page 117).

Advertising