Sony Cyber-shot DSC-L1 - Manual (Page 13)

13
DSC-L1 2-186-445-12(1) [OpenType FONT]
Getting started
Charging the battery pack
1
 Open the battery/“Memory
Stick Duo” cover.
Slide the cover in the direction of the
arrow.
• Be sure to turn off your camera when
charging the battery pack (page 17).
• Your camera operates with the
“InfoLITHIUM” NP-FT1 battery pack (T type)
(supplied). You can use only T type battery
pack (page 118).
2
Surface with the “InfoLITHIUM” logo
Battery eject lever
 Install the battery pack, then
close the battery/“Memory
Stick Duo” cover.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
Battery insertion slot
Insert the battery pack
so that tip of the

marks on the side of the
battery pack face the tip
of the
 mark on the
battery insertion slot.
• The battery pack is easily inserted by pushing
the battery eject lever toward the front of the
camera using the tip of the battery pack.
3
DC plug
AC Adaptor
Jack cover
 Connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
Connect the DC plug with the  mark
facing up.
• Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
• Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.