Sony 4-113-168-11(2) - Manual (Page 12)

ICD-BX700 4-113-168-11(2)
1
GB
Tips
When replacing the batteries, messages
recorded or alarm settings are not erased
even when you remove the batteries.
When replacing the batteries, the clock
continues moving for a certain period of
time after you remove the batteries.
Notes
Do not use manganese batteries for this IC
recorder.
When replacing the batteries, be sure to
replace both batteries with new ones.
Do not charge dry batteries.
When you are not going to use the IC
recorder for a long time, remove the
batteries to prevent damage from battery
leakage and corrosion.
Clock setting display appears and the
year section flashes when you insert
batteries for the first time, or when you
insert batteries after the IC recorder
has been without batteries for a certain
period of time. Please refer to “Continued
directly from Step 1: Preparing a Power
Source” on page 15 to set the date and
time.








When replacing the
batteries
The battery indicator on the display
shows the battery condition.
Battery remain indication
: Replace the old batteries with new
ones.

: “LO BATT“ appears and the IC
recorder will stop operation.
Battery life *1
When using Sony LR03 (SG) (size AAA)
alkaline batteries (with continuous use)
Recording
mode
SHQ
*3
HQ *4
Recording Approx. 30 hr. Approx. 30 hr.
Playback *2
through
speaker
Approx. 13 hr. Approx. 13 hr.
Playback
using the
headphones
Approx. 32 hr. Approx. 32 hr.