Sony 4-113-168-11(2) - Manual (Page 63)

ICD-BX700 4-113-168-11(2)

GB
Tro
ub
le
sh
oo
tin
g
Symptom Remedy
The operation indicator
does not light.
“LED” is set to “OFF” (page 61). Display the menu and set “LED”
to “ON.”

“FULL” is displayed and you
cannot start recording.
The memory is full. Erase some of the messages (page 47).

“FULL” is displayed and
you cannot operate the IC
recorder.
99 messages have been recorded in the selected folder or
495 messages (when there are 5 folders) in total have been
recorded. Therefore you cannot record another message, or
move a message. Select another folder (page 23), or erase
some of the messages (page 47).

Recording is interrupted. The VOR function (page 25) is activated. Set “VOR” to “OFF” in
the menu (page 58).

Noise is heard. An object, such as your finger, etc., accidentally rubbed or
scratched the IC recorder during recording so that noise was
recorded.
The IC recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or
playback.
Plug of the connected microphone was dirty when recording.
Clean the plug.
The
 (headphones) plug is dirty. Clean the plug.
Noise may be heard during VOR recording.
Noise may also be heard at the point where you add a
recording or overwrite a recording.






Recording level is low. “SENS” (microphone sensitivity) is set to “ .”
Display the menu and set “SENS” to “ ” (page 24).
