Sony 4-113-168-11(2) - Manual (Page 19)

ICD-BX700 4-113-168-11(2)
1
GB
Re
co
rd
in
g
3
Press  (stop) to stop recording.
The IC recorder stops at the beginning
of the current recording.
If you do not change the folder after you
stop recording, the next time you record
you will record in the same folder.
Tips
Before you start recording, we recommend
you make a trial recording first.
When you purchase the IC recorder, there
are 5 folders already available, and you can
record up to 99 messages in each folder.
While recording you can lock all the
functions of all the buttons so that you can
prevent inadvertent operations by sliding
the HOLD switch in the direction of the
arrow.
Notes
While the operation indicator is flashing in
orange, do not remove the batteries. Doing
so may damage the data.
Noise may be recorded if an object, such
as your finger, etc., accidentally rubs or
scratches the IC recorder during recording.
Before making a recording, be sure to check
the battery indicator (page 12).
The maximum recording time varies if you
record messages in mixed recording mode.









To Do this
pause
recording*
Press  REC/PAUSE.
During recording pause, the
operation indicator flashes
in red and “PAUSE“ flashes in
the display window.
release pause
and resume
recording
Press  REC/PAUSE again.
Recording resumes
from that point. (To stop
recording after pausing
recording, press  (stop).)
review the
current
recording
instantly
Press  PLAY/STOP•ENTER.
Recording stops and
playback starts from the
beginning of the message
just recorded.
review during
recording
Press and hold
–  during recording or
recording pause. Recording
stops and you can search
backwards while listening
to fast playback sound.
After you release –  ,
playback starts from that
point.
* One hour after you pause recording,
recording pause is automatically released
and the IC recorder enters the stop mode.