Sony RDR-GX257 - Manual (Page 63)

63
Se
tti
n
gs
a
nd
Adj
u
st
m
e
n
ts
Recorder Settings (General)
The [General] setup helps you to make clock and
other settings for the recorder.
Select [General] in the Setup Display. To use
the display, see “Using the Setup Displays” (page
62).
The default settings are underlined.
[Clock Setting]
1
Select [Clock Setting] and press ,.
2
Press M/m to set the month, and press ,.
Set the day, year, hour, and minutes in
sequence. Press
</, to select the item to be
set, then press M/m to set the numbers.
To change the numbers, press < to return to
the item to be changed, and press M/m.
3
Press ENTER to start the clock.
[TV Type]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
b Notes
• Depending on the disc, [4:3 Letter Box] may be
selected automatically instead of [4:3 Pan Scan] or vice
versa.
• When connecting to the HDMI OUT jack with output
resolution 720p, 1080i, or 1080p, the setting is fixed to
[16:9].
[Power Save]
Selects whether to turn off the front panel display
when the power is off.
Year 2008
Time 12 : 00 AM
Date 12 / 4
TV Type
Power Save
Factory Set
Clock Setting
Year 2008
Time 12 : 00 AM
Date 12 / 4
TV Type
Power Save
Factory Set
Clock Setting
[ 4:3 Letter
Box ] Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
[ 4:3 Pan
Scan ] Select this when you connect a
4:3 screen TV. Automatically
displays a wide picture on the
entire screen and cuts off the
portions that do not fit.
[ 16:9 ] Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[ Off ] The front panel display remains
turned on.
[ On ] Turns off the front panel display.
[4:3 Pan Scan]
[4:3 Letter Box]
[16:9]
,continued