Samsung SMO-211QN - Manual (Page 33)

Eng-33
2-4) SCREEN SAVE - KEY
Allows users to set the monitor's SCREEN SAVE MODE. The PICTURE screen is off when the
SCREEN SAVE KEY is pressed. Users can exit from the SCREEN SAVE MODE by pressing the
SCREEN SAVE BUTTON again. SCREEN SAVE MODE is automatically cancelled and picture is
“ON” when an event such as an alarm or video loss in the SCREEN SAVE MODE occurs.
2-5) ALARM RESET- KEY
Alarm function can be cancelled while the alarm is working.
2-6) QUAD/PAGE- KEY
Allows users to display QUAD -A or QUAD - B at QUAD DISPLAY MODE.
• QUAD - A: QUAD DISPLAY MODE from Camera 1 to Camera 4
• QUAD - B: QUAD DISPLAY MODE from Camera 5 to Camera 8
2-7) LIVE/VCR- KEY
Allows users to switch LIVE MODE to VCR MODE and vice-versa. If VCR MODE is cancelled, the
QUAD picture of LIVE MODE will be automatically displayed. In case any event happens at VCR
MODE such as ALARM, the MODE will be automatically switched to LIVE MODE, and the pre-set
operation for the event will be carried out. If there is no external input in VCR MODE, the OSD “NO
SIGNAL” will be displayed.
• LIVE MODE: Image and voice signal from CAMERA is displayed.
• VCR MODE: External image and voice signal from VCR terminal from the rear of the monitor is
displayed.