Spectra Watermakers VENTURA 150 MPC-5000 - Manual (Page 5)

5
Introduction to the Ventura 150 MPC
The Ventura represents the finest watermaker for small and midsized yachts available today. The Spectra
Clark Pump is matched to a 21” high rejection membrane. Properly installed and maintained it will supply
years of reliable service. The MPC-5000 control provides the ultimate in operational convenience and reli-
ability. Note that prudent operation is required with any marine equipment. Always maintain enough reserve
water to get safely into your next port.
The Spectra High Pressure Intensifier, known as the Clark
Pump, was introduced in 1997 and has continually im-
proved since. It holds a lifetime warranty for the original
purchaser! It is built of modern non-corroding composites.
Front View
Rear view
Pressure relief valve
Quick disconnect fitting to
facilitate maintenance.
Double rubber mounts to
absorb vibration
The Clark Pump membrane module.
Pre-mounted and plumbed together as a single unit.
Saves time and adds reliability.
Ventura feed pump inlet module.
Includes the feed pump, cooling fan, charcoal filter for the flushing
system, manual flush valve, service valve and service port . Compact
and streamlined plumbing. Feed pump may be removed and relocated
if necessary. Cooling fan is included for long life.