Sharp AL-1215 - Manual (Page 16)

14
Follow the steps below to load paper into the tray.
PAPER
For best results, use only paper recommended by SHARP.
* Do not use non-standard envelopes, and envelopes that have metal clasps, plastic
snappers, string closures, windows, linings, self-adhesive, patches or synthetic
materials. Do not use envelopes that are filled with air or envelopes that have
labels or stamps attached. These will cause physical damage to the unit.
** For paper weighing from 28 to 34.5 lbs. (105g/m 2 to 128g/m 2 ), 8-1/2" x 11" is the
maximum size that can be fed through the single bypass or the multi-bypass tray.
• Special papers such as transparency film, labels and envelopes must be fed one
sheet at a time through the single bypass or the multi-bypass tray.
Type of paper
feeding
Type of media Size Weight
Paper tray Standard paper Letter (8-1/2" x 11")
Legal (8-1/2" x 14")
Invoice (5-1/2" x 8-1/2") 15 lbs. to 21 lbs.
(56g/m
2
to
80g/m
2
)
Single bypass/
Multi-bypass
tray Standard paper and
thick paper Letter (8-1/2" x 11")
Legal (8-1/2" x 14")
Invoice (5-1/2" x 8-1/2") 14 lbs. to 34.5
lbs.**
(52g/m
2
to
128g/m 2 )
Special
media Transparency
film Letter (8-1/2" x 11")
Envelope* Commercial 10
(4-1/8" x 9-1/2")
Monarch
(3-7/8" x 7-1/2")
3
LOADING PAPER
AL-1215_1530-1551CS.book 14 ページ ２００２年８月７日 水曜日 午前９時３４分