Sharp AL-1215 - Manual (Page 23)

21
4
Flow of installation
Refer to the following table and then begin installation.
INSTALLING THE SOFTWARE
The following term is used in this section.
MFP
Means the unit as a printer and scanner.
Installing onto Windows XP (USB/parallel interface)
Before starting the installation, make sure the USB or parallel interface cable is not
connected to the MFP.
1 Insert the supplied CD-ROM into your CD-ROM drive.
2 Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM ( ) icon.
Operating
system
Interface Reference pages for how to install
Windows XP
USB/
Parallel
Installing onto Windows XP (USB/parallel interface)
(p.21)
Windows 98
USB Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Parallel
Installing onto Windows 95/98/Me/NT4.0/2000
(Parallel interface) (p.28)
Windows Me
USB Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Parallel
Installing onto Windows 95/98/Me/NT4.0/2000
(Parallel interface) (p.28)
Windows 2000
USB Installing onto Windows 98/Me/2000 (USB interface) (p.25)
Parallel
Installing onto Windows 95/98/Me/NT4.0/2000
(Parallel interface) (p.28)
Windows 95/
NT 4.0
Parallel
Installing onto Windows 95/98/Me/NT4.0/2000
(Parallel interface) (p.28)
• For this description, it is assumed that the mouse is configured for
right hand operation.
• To print or scan, the MFP must be in the online state.
• The scanner feature only works when using a USB interface cable.
• If any error message appears, solve the problem following the
instructions on the screen. After your problem is solved, the installing
procedure will be continued. Depending on your problem, you may
have to exit the installer. In this case, click the "Cancel" button to exit
the installer. After solving your problem, reinstall the software from the
beginning.
When any of "Found New Hardware Wizard" messages appear during
the software installation, be sure to click the "Cancel" button.
AL-1215_1530-1551CS.book 21 ページ ２００２年８月７日 水曜日 午前９時３４分