Sony KDL-46X4500 - Manual (Page 38)

38 GB
Black Corrector Enhances black areas of the picture for stronger contrast.
Adv. Contrast
Enhancer Automatically adjusts “Backlight” and “Contrast” to the most
suitable settings judging from the brightness of the screen.
This setting is especially effective for dark images scenes,
and will increase the contrast distinction of the darker picture
scenes.
Gamma Adjusts the balance between bright and dark areas of the
picture.
LED Dynamic
Control (for KDL-
55X4500/46X4500) Sharpens the contrast by making dark parts of the picture
even darker.
Auto Light
Limiter Reduces glare such as in scenes where the entire screen is
white.
Clear White Emphasises white colours.
Colour Space Changes the colour reproduction gamut. “Wide” reproduces
the vivid colour and “Standard” reproduces the standard
colour.
Live Colour Makes colours more vivid.
White Balance Adjusts the temperature of each colour.
Detail Enhancer Enhances the details of the picture.
Edge Enhancer Enhances the outline of the picture.
Sound
Target Inputs Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing. Set to “Common” if you want to
apply the same settings to each input.
Common Applies common settings to all inputs in which “Target
Inputs” is set to “Common”.
Name of current
input (e.g. AV1) Allows you to make custom settings for the input.
Sound Mode Dynamic Enhances the treble and bass sounds.
Standard For standard sounds. Recommended for home entertainment.
Clear Voice Makes voice sound clearer.
Reset Resets all the “Sound” settings to the factory settings excluding “Target Inputs”,
“Sound Mode” and “Dual Sound”.
Treble Adjusts higher-pitched sounds.
Bass Adjusts lower-pitched sounds.
Balance Emphasises the left or right speaker.
Auto Volume Keeps volume level constant across all programmes and adverts (e.g. adverts tend
to be louder than programmes).
Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target
Inputs” is set to the current input name (e.g. AV1).