Sony KDL-46X4500 - Manual (Page 42)

42 GB
Audio Settings
Speaker TV Speaker Turns on and outputs the TV’s sound from the TV speakers.
Audio System Turns off the TV speakers and outputs the TV’s sound from
external audio equipment connected to the audio output
sockets on the TV.
You can also turn on the connected equipment that is
compatible with control for HDMI, after making the
appropriate settings of control for HDMI.
Audio Out Variable When using an external audio system, volume output from
audio out can be controlled using the TV’s remote.
Fixed The audio output of the TV is fixed. Use your audio
receiver’s volume control to adjust the volume (and other
audio settings) through your audio system.
i Speaker Link Switches the TV’s internal speakers on/off when you connect headphones to the
TV.
On Sound is output only from the headphones.
Off Sound is output from the TV and the headphones.
i Volume Adjusts the volume of the headphones when “i Speaker Link” is set to “Off”.
i Dual Sound Sets the sound from the headphones for a bilingual broadcast.
Woofer Level Adjusts the bass level to taste since the bass level varies depending on where the
TV is located. Decrease the level if you feel too much bass is being output, and
increase the level if you feel not enough bass is being output.
~
• This adjustment is only necessary when the TV is first installed or when its
location has been changed. Adjustment is not required for regular listening.
Set-up
USB Auto Start Automatically starts photo playback when the TV is turned on and a digital still
camera or other device storing photo files is connected to the USB port and then
turned on.
~
• Playback does not start automatically if the TV is turned on after connecting the
digital still camera or other device to the USB port.
Quick Start The TV turns on faster than usual by turning on the power using the remote.
However, power consumption in standby mode is approximately 20 watts higher
than usual. Up to 3 out of 5 time zones can be set.