Sherwood RD-6513 - Manual (Page 22)

ENGLISH
23
Memorizing the adjusted channel levels
• Then "1" of "REF 1" indication flickers for several
seconds.
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you
want.
• "CAL " (or "REF 1", etc.) is displayed for several
seconds.
• If the channel level mode display disappears, press this
button again.
• The adjusted channel levels have now been memorized
into the selected memory.
• If the preset memory disappears, perform the above
step 1 again.
1.
After performing the steps 1 ~ 4 in "Adjusting the current channel level" procedure on page 22, press the
(MEMORY/)ENTER button.
Recalling the memorized channel levels
• Then the channel levels memorized into the selected
preset memory are recalled.
2.
Select the desired one of REF 1 and REF 2.
3.
Confirm your selection.
1.
Press the CHANNEL LEVEL button.
2.
Select the desired one of REF 1 and REF 2.
RD-6513(A) 2008.8.21 12:19 PM 페이지 23