Sherwood RD-6513 - Manual (Page 30)

ENGLISH
31
SETTING THE SYSTEM
When selecting the SUBWOOFER mode
1.
Press CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
• "SW ＋" mode is effective only when "FRONT", "CENTER" or "SURR" is set to "L" and "SUB- W" is set to "Y" on the SPK
SET menu. (For details, refer to "SETTING THE SPEAKER SETUP" on page 34.)
NORM : When the low frequency signals of channels set to "L" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the
".1" channel) and the channels set to "S".
SW ＋: When the low frequency signals of channels set to "L" are reproduced simultaneously from those channels and the
subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and
shape of the room, interference may result in a decrease of the actual volume of the low frequency range.
• SW (SUBWOOFER) : To select the desired subwoofer mode.
• TONE : To adjust the tone (bass and treble) as desired.
• RMEQ (ROOM EQ) : To select the desired room EQ mode.
• RETURN : To return to the previous menu.
RD-6513(A) 2008.8.21 12:20 PM 페이지 31