Samsung SNC-B2331(P) - Manual (Page 49)

English _49
●
SETUP SCREEN
<NTP Server IP> is provided by a public agency, the list of which is subject to change from time
to time.
In a local network, a separate NTP server must be manually defi ned.
The current time can vary depending on the computers regional (GMT and DST) and country (PC
time confi guration) settings.
To check the log information
Select <System> - <Log>.
The Log information list appears.
System log list : Shows the log
information about the system changes
along with time and IP address.
User login : Shows the current login
user to the camera.
Video confi guration change : Show
video setting changes.
System time change : Shows the time changes.
System started : Shows time when the camera is turned on.
The maximum of 2000 logs can be recorded.
If the log number is over 2000, the log in the bottom of the log list will be replaced with a new log.
To update the software
Select <System> - <Software update>.
The Software update window appears.
How to update the software
From the software update window, click
[Browse…].
The Open dialog appears.
Select an updatable fi le and click
[Open].
From the software update window, click
[Install].
The selected fi le will be unzipped with a
start of the update.
It may take a several minutes to
complete the update.
M


J

y
-
-
-
-
M

1.
2.
3.