SMC Networks 100 - Manual (Page 40)

I
NSTALLING THE
S
WITCH
3-2
Equipment Checklist
After unpacking the TigerSwitch 100, check the contents to be sure
you have received all the components. Then, before beginning the
installation, be sure you have all other necessary installation
equipment.
Package Contents
◆ TigerSwitch 100 unit, SMC6924VF
◆ Four adhesive foot pads
◆ Bracket Mounting Kit containing two brackets and four screws
for attaching the brackets to the switch
◆ Power Cord—either US, Continental Europe or UK
◆ RS-232 console cable
◆ This Installation Guide
◆ SMC Warranty Registration Card—be sure to complete and
return to SMC
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the
following equipment available:
◆ Four mounting screws for each device you plan to install in a
rack—these are not included
◆ A screwdriver (Phillips or flathead, depending on the type of
screws used)