Sony MZ-R900 - Manual (Page 18)

18
• You can make digital recording only from an
optical type output.
• When recording from a portable CD player,
set the CD player to pause, and then do the
recording procedure on the recorder.
• Note the following when recording from a
portable CD player:
—Some portable CD players may not be
capable of digital out unless powered by the
AC power.
—Connect the AC power adaptor to the
portable CD player and use it on AC power
as the power source.
—Disable any anti-skip function (such as
ESP*) on the portable CD player.
∗ Electronic Shock Protection
z
• LINE IN (OPT) jack is for both digital and
analog input. The recorder automatically
recognizes the type of line cable and switches
to digital or analog input.
• The level of the recorded sound is adjusted
automatically.
• You can monitor the sound during recording.
Connect the supplied headphones/earphones
with remote control to i/LINE OUT and
adjust the volume by pressing VOL +/–. This
does not affect the recording level.