Sony MZ-R900 - Manual (Page 51)

51
3
Flip the jog lever (L) until the phrase
you want to erase appears, and then
press the lever (L).
“Erase!” appears and the phrase is
erased. If no phrase is stored in the
phrase bank, “EMPTY” appears in
the display.
To cancel the operation, press x.
On the remote control
Storing phrases while labeling
1
Do the procedure “On the remote
control” in “Labeling recordings”
(page 48) to enter a phrase.
2
After entering the phrase, press X for
2 seconds or more.
“Entry!” appears in the display and
the cursor flashes after the phrase you
just stored. You can then continue
with labeling operation.
z
You can store phrases from a previously labeled
track or disc.
Do the procedure “Relabeling recordings”
(page 49) and display the track or disc name
that contains the phrase that you want to store.
Press VOL +/– repeatedly to move the cursor to
the right of the phrase. Then press X for 2
seconds or more to store the phrase.
Storing phrases using the EDIT
menu
1
Press DISPLAY for 2 seconds or
more.
2
Turn the control towards . or
towards N> until “EDIT” flashes
in the display, and press x.
3
Turn the control towards . or
towards N> repeatedly until
“Name Bank” flashes in the display,
and then press x.
4
Enter the phrase you want to store,
then press x for 2 seconds or more.
“Entry!” appears in the display and
the phrase is stored.
Retrieving phrases stored in
the phrase bank
Searching for a phrase by displaying
the stored phrase one by one
1
Do the procedure “On the remote
control” in “Labeling recordings”
(page 48) until “
: Name” or
“ : Name” appears in the display.
Then press x.
2
Press X repeatedly until the first
phrase stored in the phrase bank
appears in the display.
3
Turn the control towards . or
towards N> repeatedly.
Turning the control towards . or
towards N> causes the phrases
stored in the phrase bank to appear
one by one. If you press X at this
time, the first phrase stored in the
phrase bank retrieved.
4
Press x while the phrase you want is
shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
DISPLAY
X
Control
x