Sony MZ-R900 - Manual (Page 29)

29
Display window on the recorder
z
The display that appears on the remote control
is different from the ones on the recorder. See
“On the remote control” (page 29) to check the
display that appears on the remote control.
To know the recording
condition
The indicator lights up or flashes
according to the recording condition.
z
If you want to check the playing position or
track name while playing, see page 40.
On the remote control
1
Press DISPLAY while recording or in
stop mode.
Each time you press the button, the
display changes as follows.
Display window on the remote control
Indication C/D
While recording
Track number/Elapsed time
r
Track number/Remaining time for
recording
r
—/Current time
1)
1) Appears only when the clock is set.
A B
Track number Elapsed time
Track number 1)
1) If the track is labeled, “ ” appears in the
display followed by the track name (appears
only when “RecRemain” is selected while
stopped).
Remaining time for
recording
Numbers of tracks
after the current
track
2)
2) If the disc is labeled, “ ” appears in the
display followed by the disc name (appears
only when “AllRemain” is selected while
stopped).
Remaining time
after the current
location
Current date 3)
3) Appears only when the clock is set (appears
only when “Clock” is selected).
Current time 3)
Recording
condition REC indicator
While recording lights up
flashes according
to the loudness of
the source while
recording with a
microphone (voice
mirror)
Recording standby flashes
A B
Less than 3
minutes’
recording time
available flashes slowly
A track mark has
been added (when
controlling by the
recorder only) goes off
momentarily
Recording
condition REC indicator
DISPLAY
C D
continued