Sony BKMW-E3000 - Manual (Page 12)

12
Preparations
Enabling File Reception when Using
a Cassette without a Memory Label
It is normally necessary to attach a memory label to a
cassette to enable FTP file reception. Follow the procedure
to below enable FTP file reception when using a cassette
without a memory label.
In the case of a cassette without a memory label, recording
of a file by the e-VTR begins from the tape position at the
time the FTP command is received. Keep in mind that all
material after that point will be overwritten by the received
file.
1
Do steps 1 to 3 of “Basic Network Settings” (see page
9) to display the M5: NETWORK page of the
maintenance menu.
2
Rotate the MULTI CONTROL knob to bring the
cursor (*) to M57: OTHERS CONFIG, and then press
the F5 (SET) button.
The sub-page for M57: OTHERS CONFIG appears.
3
Rotate the MULTI CONTROL knob to bring the
cursor (*) to M570: REC WITHOUT TELE-F, and
then press the F5 (SET) button.
The M570: REC WITHOUT TELE-F setting page
appears.
4
Rotate the MULTI CONTROL knob to change the
setting.
enable: Recording of transferred files is enabled even
when cassettes inserted in the e-VTR have no
memory labels.
disable (default setting): Recording of transferred
files is disabled for cassettes inserted in the e-VTR
with no memory labels.
5
Press the F5 (SET) button.
The message “Save Complete” appears.
Note
M5 : NETWORK
M56 : IP CONFIG
DHCP:disable
IP ADDRESS:
192.168.000.001
SUBNET MASK:
255.255.255.000
DEFAULT GATEWAY:
192.168.000.254
DNS SERVER ADDRESS:
192.168.000.254
M5 : NETWORK
M50 : IP ADDRESS
M51 : SUBNET MASK
M52 : DEFAULT GATEWAY
M55 : TAPE LEADER CONFIG
M56 : IP CONFIG
M57 : OTHERS CONFIG
M58 : M50-M52 RENEW
M59 : RESET ALL USER
OTHERS CONFIG
M570: REC WITHOUT TELE-F
M571: REC WITH TELE-F
M572: TEMP FILE CREATE
OTHERS CONFIG
M570: REC WITHOUT TELE-F
disable
Push SET button