Sony BKMW-E3000 - Manual (Page 6)

6
Overview
memory label (rec start marks, shot marks, cue points, IN/
OUT points).
User registration
Up to 5 users can be registered for one e-VTR.
One of the registered users is “superuser,” and the other
users are “general users,” registered by the superuser.
The privileges of the users are as follows:
Superuser
• Can register general users.
• Can view video and audio recorded at any location on
cassette tapes.
• Can create files at any location on cassette tapes.
• Can change the properties of files owned by all users.
General users
• Can change own password.
• Can view file segments in files to which the user has
access privileges.
• Can modify attributes of files for which the user has
attribute modification privileges.
The superuser registers general users on the user
registration page of the Web application (see page 42).
General users can use the same page to change their own
passwords.
Backing up Setup menu settings
Setup menu settings of the e-VTR can be saved to the
computer via a network. The saved file can then be used to
recover settings or copied to other e-VTRs.
SNMP (Simple Network Management
Protocol) function
The SNMP function allows management information on
network devices (i.e., the e-VTR) to be monitored from
external monitoring software. SNMP settings for each e-
VTR on the network can be made through the maintenance
screen of the Web browser.
External server link of metadata
A meta-data file in an external server can be downloaded
and stored with video and audio data as a single MXF file
enabling file transmission. You can thus operate metadata
under external control and video/audio data recorded on
tapes in collaboration.
Automatic file-system data operations with
an external server
Information regarding the file system is normally stored in
the Tele-File. You can set your e-VTR to write and
automatically read these data to/from an external server.
This permits you to specify many files regardless of the
Tele-File capacity.
e-VTR Manager Application Software
Functions
The supplied e-VTR Manager application software can be
installed on a computer connected to the e-VTR to enable
control of the e-VTR from the computer.
The software provides the following functions.
MXF file transfers between FTP servers,
including the e-VTR
The application can control MXF file transfers between e-
VTRs and between e-VTRs and servers, You can register
multiple network devices on a single computer and control
the devices individually.
e-VTR file creation, modification, and
deletion
Files can be created by defining the top and end of
previously recorded sections on the tape. These files can be
modified and deleted.
e-VTR video and audio monitoring
The contents of video and audio files on the e-VTR can be
monitored in real time on the computer. You can create
files while checking video and audio.
Storage and playback of MXF Proxy AV
files
You can load MXF Proxy AV files from an e-VTR to a
local disk of your PC. It is also possible to play back MXF
Proxy AV files stored on the local disk.
Trademarks
• Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
• Netscape is a registered trademark of Netscape
Communications Corporation in the United States and/or other
countries.