Southbend Swivel Mast Bandsaw sb1018 - Manual (Page 4)

INTRODUCTION
-2-
For Machines Mfg. Since 8/09 Model SB1018 I N T R O D U C T I O N
About This Machine
Capabilities
This metal cutting bandsaw uses a gravity-fed
blade to make straight cuts through workpieces
that are clamped in a vise. Since the workpiece is
secured and remains stationary while the blade
lowers automatically, accuracy and operator
safety are maximized.
The vise on the Model SB1018 is capable of
holding rectangular stock up to 5" x 6" and round
stock up to 5".
After a cut is complete, the OFF switch is
triggered and the motor automatically turns off.
Features
In addition to its capabilities, the Model SB1018
has several features to increase versatility and
efficiency.
The headstock can be rotated to make angled
cuts from -45°–60° while three blade speeds
ensure that the proper cutting rate is available
for a variety of workpiece sizes and materials.
Both the downfeed rate and pressure are
adjustable for fine-tuning each cutting operation
and an adjustable auto-OFF power switch
maximizes safety and minimizes energy use by
turning the machine off at the end of every cut.
A storage compartment in the cabinet base
provides a convenient location for keeping spare
blades or other accessories and the transport
handle makes moving the machine easy.
Finally, the cast-aluminum knobs and belt cover
proudly bear the legendary South Bend name.