Preparation for use programmable controller – Shoprider ISO9001 User Manual

Page 14

Advertising
background image

~13~

GMP

ISO9001

ISO14001

ISO13485

CERTIFIED


NOTE: Before using the Powerchair for the first time, be sure the batteries have
been connected. Charge the Powerchair for at least 6-8 hours prior to first
time use
.

NOTE! Maximum efficiency can only be achieved with sufficient battery
power and adequate run-up distance.

WARNING! Be aware that the angle of incidence should be approached
around 90
° to ensure safety and stability.

WIZZ (888WNL-11), STREAMER (888WAB-11, 888WB-11, 888WSB-11), JETSTREAM-L
(888WAL-11), JETSTREAM-M (888WAM-11) Powerchairs have programmable
controllers. For more information regarding the programming parameters for the
programmable Powerchair controller please contact your provider.

Note: WIZZ (888WNL-10), STREAMER (888WAB-10, 888WB-10, 888WSB-10),
JETSTREAM-L (888WAL-10), JETSTREAM-M (888WAM-10), are non-programmable
Powerchairs.

PREPARATION FOR USE

PROGRAMMABLE CONTROLLER

Advertising
This manual is related to the following products: