Trouble shooting – Shoprider ISO9001 User Manual
Page 26
~25~
GMP
ISO9001
ISO14001
ISO13485
CERTIFIED
LOCK MODE: The VSI controller can be locked to prevent unauthorized use. The
locking method is achieved through a sequence of key presses and joystick
movements, as detailed below.
To lock Powerchair controller:
While the controller is switched on, depress and hold the on/off button.
After 1 second the controller will bleep. Now release the on/off button.
Push the joystick forward until the controller bleeps.
Push the joystick in reverse until the controller bleeps.
Release the joystick, there will be a long bleep.
The Powerchair controller is now locked.
To unlock the Powerchair controller:
Use the on/off button to switch the controller on. The maximum
speed/profile indicator will be rippling up and down.
Push the joystick forward until the controller bleeps.
Push the joystick in reverse until the controller bleeps.
Release the joystick, there will be a long bleep.
The Powerchair is now unlocked.
SLEEP MODE: If the controller is left on and not used for more than ten minutes,
the controller will automatically “go to sleep”. This is recognized by a slow
intermittent flash of the battery indicator lights. Simply turn the controller off and
back on to reset.
TROUBLE SHOOTING